Avaya DEFINITY Server CSI Maintenance Manual page 558

Maintenance Commands
Table 28. Test of 'all ports' option for the following boards: — Continued
Board
Number
TN735 MET Line
TN742 8 port Analog Line
SPE-interchange
Output
The following example shows the output for test hardware-group system and
assumes that the board in port network 1, carrier c, slot 7 is an analog board with
three administered ports and test sequence repeat = 3. Responses to this
command running in the foreground appear on a test-by-test basis with one line of
data for each test result.
test hardware-group system
Port Maintenance Name
01C07 ANL-BD
01C07 ANL-BD
01C0703 ANL-LINE
01C0702 ANL-LINE
01C0703 ANL-LINE
01C0701 ANL-LINE
01C0702 ANL-LINE
01C0703 ANL-LINE
01C0702 ANL-LINE
01C0701 ANL-LINE
01C0701 ANL-LINE
Testing system, 11070 of 12300 (90%) MOs tested for repetition 1
558
Issue 5 October 2002
Description
Allow for planned interchange of duplicated SPEs and
subsequent testing of both the active and standby SPEs.
TEST RESULTS
Alt. Name Test No. Result
Board
Number
TN2149 Analog Line
TN2180 16 port Analog line
51 PASS
52 PASS
35 PASS
35 PASS
48 PASS
35 PASS
48 PASS
36 PASS
36 PASS
48 PASS
36 PASS
Description
Continued on next page
Error Code
555-233-119