Test Cdr-Link - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands
Field descriptions
Port
Maintenance
Name
Test No
Result
Error Code

test cdr-link

test cdr-link primary | secondary [short | long] [repeat number | clear]
[schedule]
Use test cdr-link to validate that a Call Detail Recording (CDR) link has been
administered and established. The test defaults to "short".
Parameters
[primary | secondary]
For more information see
Fields" at the beginning of this chapter.
540
Issue 5 October 2002
Port address (cabinet-carrier-slot-circuit): cabinet 1, carrier is A
(control carrier A in a simplex system) and either A or B (control
carriers A and B in a duplex system). The slot and circuit fields in
the port address for the CAP-MEM, and CARD-MEM maintenance
objects are always blank. The port address for maintenance object
FL-DATA is blank.
The name of maintenance object being tested:
CARD-MEM for the memory card
CAP-MEM for memory card capacity
FL-DATA for the data consistency stored in memory cards
(duplicated switch)
The test being executed
Test result: Pass, Fail, or Abort
Numeric code explaining why the release failed or aborted. See
the detailed list of the codes by test number for each MO.
A system may have up to two CDR links: a primary that is
normally used and a secondary that serves as a backup in case
the primary fails. This qualifier specifies which link to test.
Primary is the default.
"Common Input Parameters" and "Common Output
555-233-119