Test Isdn-Testcall - Avaya DEFINITY Server CSI Maintenance Manual

test isdn-testcall

test isdn-testcall
Use test isdn-testcall to run an outgoing, asynchronous ISDN-PRI test call in the
asynchronous method from a specified trunk. If the test results are PASS, the test
call is started. A test result of ABORT means that a resource wasn't available, for
example, B-channel or a Maintenance/Test circuit pack. A test result of FAIL
means that the outgoing ISDN-PRI test call was not established.
Action/Object Qualifier
test group
isdn-testcall number
member
number
minute
number
schedule
1 See the Report Scheduler and System Printer feature specification for more details.
Feature Interactions
Use the status isdn-testcall command for details on how to access the
additional data available after running the test.
Only one ISDN trunk can be tested per port network at a time. Once testing
is completed, another ISDN trunk can be tested in that port network.
The maximum number of asynchronous outgoing test calls running
depends upon the number of Maintenance/Test circuit packs in the system.
555-233-119
Qualifier Description
The administered group number
associated with each trunk group
The administered member number
identifying a particular trunk within a
trunk group.
Duration of the test call in minutes
(1-120)
Use the screen to schedule execution
of the command. The command is
placed in the command queue and is
executed at the specified time. The
information displayed by the command
is sent to the system printer instead of
1
the screen.
Examples:
test isdn-testcall 80/1
test isdn-testcall 80/1 schedule
test isdn-testcall 78/2 minutes 10
test isdn-testcall 78/3 minutes 100
schedule
Feature
Logins Defaults Interactions
init duration See below
inads = 8.4 or
craft 9.6 sec
Issue 5 October 2002
563