Avaya DEFINITY Server CSI Maintenance Manual page 539

test card-mem
Feature Interactions
Use test card-mem long to run the Memory Card Erase/Write/Read Test. This
means that save translation and save announcement are rejected while the
write-to-memory-card operation is active. This test also invokes the Memory Card
Capacity Test which determines whether the memory card is more than 98% full.
This test is also invoked after the save translation command.
In a High or Critical Reliability System, running test card-mem command for a
memory card in the standby SPE means that the standby SPE is put into the
maintenance mode and no SPE interchange is allowed through reset system
interchange or scheduled SPE interchange.
Output
The following example shows the output from test card-mem a long. The
responses appear on a test-by-test basis with one line of data for each test result.
test card-mem a long
Port Maintenance Name
01A CARD-MEM
01A CARD-MEM
01A CARD-MEM
01A CARD-MEM
01A CARD-MEM
01A CARD-MEM
01A CARD-MEM
01A CAP-MEM
FL-DATA
555-233-119
TEST RESULTS
Alt. Name Test No. Result
1014
SPE A
695 PASS
696 PASS
697 PASS
698 PASS
699 PASS
694 PASS
693 PASS
PASS
421 PASS
Issue 5 October 2002
Error Code
539