Ospf Router-Id - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS
-
OSPF ROUTER ID

ospf router-id

Overview Use this command to specify a router ID for the OSPF process.
Use the no variant of this command to disable this function.
Syntax ospf router-id <ip-address>
no ospf router-id
Mode Router Configuration
Usage Configure each router with a unique router-id. In an OSPF router process that has
active neighbors, a new router-id takes effect at the next reload or when you
restart OSPF manually.
Example The following example shows a specified router ID 2.3.4.5.
awplus#
awplus(config)#
awplus(config-router)#
Related show ip ospf
commands
C613-50631-01 Rev A
Parameter Description
<ip-address>
Specifies the router ID in IPv4 address format.
configure terminal
router ospf 100
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ospf router-id 2.3.4.5
1164