JunosE 11.3.x Command Reference Guide N to Z
unknown-protocol
Syntax
Release Information
Description
Options
Mode
1394
unknown-protocol { permit | deny }
no unknown-protocol
Command introduced before JunosE Release 7.1.0.
Modifies the subscriber policy for packets containing an unknown protocol to define
whether the subscriber (client) interfaces that belong to a bridge group or to a VPLS
instance forward (permit) or filter (deny) these packets. The no version restores the
default value, permit unknown protocol packets.
You cannot change the default subscriber policy values for trunk (server) interfaces that
belong to a bridge group or to a VPLS instance. You also cannot change the default
subscriber policy values for a VPLS virtual core interface, which acts as a trunk interface.
The VPLS virtual core interface represents all of the MPLS tunnels from the router to the
remote VPLS edge (VE) devices.
permit—Specifies that the subscriber interface associated with the bridge group or
VPLS instance forwards packets containing an unknown protocol
deny—Specifies that the subscriber interface associated with the bridge group or VPLS
instance filters packets containing an unknown protocol
Subscriber Policy Configuration
Copyright © 2010, Juniper Networks, Inc.