User-Packet-Class - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

user-packet-class

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1400
[ no ] [ suspend ] user-packet-class userPacketClassValue
Command introduced before JunosE Release 7.1.0.
Adds a user packet class rule to a policy list that sets the user packet class attribute of
packets that match the current classifier control list. The no version removes a user
packet class from a policy list; the suspend version temporarily suspends the policy rule;
the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the
user-packet-class command, which may be removed completely in a future
release.
userPacketClassValue—User packet class value assigned to packets, in the range 0–15
Classifier Group Configuration
Policy Rule Precedence
Copyright © 2010, Juniper Networks, Inc.