Use-Release-Grace-Period - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

use-release-grace-period

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] use-release-grace-period
Command introduced in JunosE Release 8.0.0.
Applies the grace period, which is specified by the grace-period command, to the DHCP
local address pool addresses that are explicitly released by clients. When a client releases
an address, the address enters the grace period and can be reassigned only to the original
client. The no version restores the default, which disables the use of the grace period for
explicitly released addresses.
DHCP Local Pool Configuration
Chapter 9: U, V, W, and Y Commands
1397