Use Canned-Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

use canned-group

Syntax
Release Information
Description
Options
Mode
1396
use canned-group groupName [ revert ]
no use canned-group
Command introduced in JunosE Release 8.1.0.
Creates a DoS protection group that uses a preconfigured (canned) set of parameters.
The revert keyword returns to the original values, which are the default for the group.
The no version associates the group with the default preconfigured group settings.
groupName—Name of the DoS protection template
DoS Protection Group Configuration
Copyright © 2010, Juniper Networks, Inc.