Vlan Auto-Configure - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

vlan auto-configure

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
vlan auto-configure upperInterfaceType [ lockout-time { minTime maxTime |
none } ]
no vlan auto-configure upperInterfaceType [ lockout-time ]
Command introduced in JunosE Release 7.1.0.
lockout-time keyword added in JunosE Release 7.3.0.
Specifies the types of dynamic upper interface encapsulations that are accepted or
detected by a dynamic VLAN subinterface. You can issue this command repeatedly in
Profile Configuration mode to include autodetection of multiple upper interface
encapsulation types within the base profile for a dynamic VLAN subinterface. The no
version terminates detection of the specified encapsulation type.
upperInterfaceType—One of the following dynamic encapsulation types:
ip
pppoe
minTime—Minimum lockout time in the range 1–86400 seconds (24 hours); default
value is 1 second
maxTime—Maximum lockout time in the range 1–86400 seconds (24 hours); default
value is 1 second
none—Disables lockout time for the specified dynamic encapsulation type
Profile Configuration
Chapter 9: U, V, W, and Y Commands
1409