Version - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

version

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
version { 1 | 2 }
no version
Command introduced before JunosE Release 7.1.0.
Specifies the global RIP version. The no version reverts to the default value, RIP version
1. Use the ip rip receive and ip rip send version commands to specify the RIP version for
a specific interface.
1—RIP version 1
2—RIP version 2
Address Family Configuration, Router Configuration
Chapter 9: U, V, W, and Y Commands
1405