Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
vlan advisory-tx-speed
Syntax
Release Information
Description
Options
Mode
1408
vlan advisory-tx-speed speed
no vlan advisory-rx-speed
Command introduced in JunosE Release 7.2.0.
Sets an advisory connect (Tx) speed that the LAC sends in the Tx connect speed to the
LNS. The no version restores the default behavior, in which the Tx speed is not sent to
the LNS.
speed—Speed in the range 0–2147483647 kbps; 0 indicates no advisory speed setting
Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
