Undebug Ip Rip - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

undebug ip rip

Syntax
Release Information
Description
Options
Mode
1388
undebug ip rip ripLog
Command introduced before JunosE Release 7.1.0.
Turns off the display of information previously enabled with the debug ip rip command.
There is no no version.
ripLog—RIP log of interest; one of the following options:
events—General RIP events, such as removing RIP from an interface or creating the
RIP process
route—Events associated with two RIP routers exchanging routes
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.