JunosE 11.3.x Command Reference Guide N to Z
vlan bulk-config shutdown
Syntax
Release Information
Description
Options
Mode
1414
To shut down or reenable the specified bulk configuration or a specific VLAN range:
[ no ] vlan bulk-config bulkConfigName shutdown
[ no ] vlan bulk-config bulkConfigName shutdown vlan-range vlanIdStart vlanIdEnd
To shut down or reenable VLAN ranges containing double-tagged S-VLAN IDs or based
on agent-circuit-identifier information:
[ no ] vlan bulk-config bulkConfigName shutdown svlan-range s-vlanIdStart s-vlanIdEnd
{ vlanIdStart vlanIdEnd | any | agent-circuit-identifier }
Command introduced in JunosE Release 7.3.0.
Administratively disables (shuts down) the specified bulk configuration, or a specified
VLAN range or subrange. When you shut down a specified bulk configuration, all VLAN
ranges, including those based on double-tagged S-VLAN IDs or agent-circuit-identifier
information, are disabled. The no version reenables the specified bulk configuration, the
specified VLAN range, or the specified subranges; this is the default condition.
bulkConfigName—Name of the VLAN range; string of up to 80 characters
vlanIdStart—Starting VLAN ID of the VLAN subrange you are configuring
vlanIdEnd—Ending VLAN ID of the VLAN subrange you are configuring
s-vlanIdStart—Starting S-VLAN ID of the S-VLAN subrange you are configuring
s-vlanIdEnd—Ending S-VLAN ID of the S-VLAN subrange you are configuring
any—Specifies the VLAN ID as a wildcard
agent-circuit-identifier—Specifies a VLAN range that is based on agent-circuit-identifier
information
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.