Virtual-Router - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

virtual-router

Syntax
Release Information
Description
Options
Mode
1406
virtual-router vrName | :vrfName | vrName:vrfName
no virtual-router vrName [ wait-for-completion [ waitSeconds ] ]
Command introduced before JunosE Release 7.1.0.
Creates a virtual router or accesses the context of a previously created virtual router or
a VRF. The no version deletes the virtual router, and the router defaults to the default
virtual router. Issuing a no version that specifies an existing VRF only displays the error
message: " Cannot delete a VRF with this command." You must use the no ip vrf command
to remove a VRF.
NOTE: In Domain Map Configuration mode, the virtual-router command has
been replaced by the router-name command and may be removed completely
from Domain Map Configuration mode in a future release.
vrName—Name of the virtual router; a string of 1–32 alphanumeric characters
:vrfName—Name of a VRF in the current VR context; a string of 1–32 alphanumeric
characters
vrName:vrfName—Name of a VRF in the context of a VR other than the current VR
wait-for-completion—Specifies (in the absence of waitSeconds) that the CLI waits for
completion of the no version operation before it returns a prompt, regardless of how
long that takes
waitSeconds—Number of seconds, in the range 1–64000, that the CLI waits before it
returns a prompt, regardless of whether the no version operation has been completed
Global Configuration, Privileged Exec
Copyright © 2010, Juniper Networks, Inc.