Undebug Ip Mbgp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

undebug ip mbgp

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
undebug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ]
[ bgpLog ] [ router routerName ] [ filtering-router filteringRouterName ]
[ accessClassName ] [ route-map mapName ]
Command introduced before JunosE Release 7.1.0.
Turns off the display of information previously enabled with the debug ip mbgp command.
There is no no version.
in—Displays information for inbound events
out—Displays information for outbound events
peerAddress—IP address of BGP peer for which information is displayed
peerAddressMask—Network mask of BGP peer for which information is displayed
bgpLog—BGP log of interest; one of the following options:
dampening—BGP dampening event; route is suppressed or no longer suppressed
by route-flap dampening
events—BGP finite state machine events and transitions
keepalives—BGP keepalive message events
next-hops—BGP next hop events
updates—BGP routing table update events
routerName—Name of the virtual router that owns the BGP router for which information
is being displayed
filteringRouterName—Name of the virtual router that owns the access class and route
map parameters
accessClassName—Name of an access list to filter output
mapName—Name of a route map to filter output
Privileged Exec
Chapter 9: U, V, W, and Y Commands
1385