Vlan Bulk-Config - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

vlan bulk-config

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
To configure or remove a bulk configuration or a specific VLAN range:
vlan bulk-config bulkConfigName [ vlan-range vlanIdStart vlanIdEnd ]*
no vlan bulk-config bulkConfigName [ vlan-range vlanIdStart vlanIdEnd ]
To configure a VLAN range containing double-tagged S-VLAN IDs:
vlan bulk-config bulkConfigName [ svlan-range s-vlanIdStart s-vlanIdEnd
vlanIdStart vlanIdEnd ]*
To configure a VLAN range containing S-VLAN IDs with any VLAN ID:
vlan bulk-config bulkConfigName [ svlan-range s-vlanIdStart s-vlanIdEnd any ]*
To configure a VLAN range that is based on agent-circuit-identifier information:
vlan bulk-config bulkConfigName [ svlan-range s-vlanIdStart s-vlanIdEnd
agent-circuit-identifier ]*
To remove a VLAN range containing S-VLAN IDs or agent-circuit-identifier information:
no vlan bulk-config bulkConfigName [ svlan-range s-vlanIdStart s-vlanIdEnd
{ vlanIdStart vlanIdEnd | any | agent-circuit-identifier } ]
Command introduced in JunosE Release 7.3.0.
Configures a range of single-tagged VLAN IDs and double-tagged S-VLAN IDs for use by
a dynamic VLAN subinterface, and assigns a name to the VLAN range. Each VLAN range
consists of one or more nonoverlapping VLAN subranges. A VLAN subrange is a group
of VLAN IDs that resides within the specified VLAN ID ranges. You can configure multiple
VLAN ranges on a major VLAN interface. The no version removes the specified VLAN
range (including all subranges in the range) from the VLAN major interface or the specified
subrange from the VLAN range. The no version also removes any overriding profile
assignments for VLAN IDs within the deleted VLAN range or VLAN subrange.
bulkConfigName—Name of the VLAN range; string of up to 80 characters
vlanIdStart—Starting VLAN ID of the VLAN subrange you are configuring
vlanIdEnd—Ending VLAN ID of the VLAN subrange you are configuring
s-vlanIdStart—Starting S-VLAN ID of the VLAN subrange you are configuring
s-vlanIdEnd—Ending S-VLAN ID of the VLAN subrange you are configuring
any—Specifies the VLAN ID as a wildcard
agent-circuit-identifier—Specifies a VLAN range that is based on agent-circuit-identifier
information
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Chapter 9: U, V, W, and Y Commands
1411