Udp-Port - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

udp-port

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
udp-port port
no udp-port
Command introduced before JunosE Release 7.1.0.
From RADIUS Configuration mode, specifies the UDP port on the router where the RADIUS
authentication, accounting, or dynamic-request servers reside. The router uses this port
to communicate with the RADIUS servers. The no version restores the default value.
From RADIUS Relay Configuration mode, specifies the UDP port on the router where the
RADIUS relay authentication or accounting server resides. The router uses this port to
communicate with the RADIUS relay servers. The no version restores the default value.
port—Port number in the range 1–65535
1812—Default for RADIUS and RADIUS relay authentication servers
1813—Default for RADIUS and RADIUS relay accounting servers
1700—Default for RADIUS dynamic-request servers
RADIUS Configuration, RADIUS Relay Configuration
Configuring RADIUS-Based Mirroring
Chapter 9: U, V, W, and Y Commands
1383