Ip Icmp Update-Source - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

ip icmp update-source

ip icmp update-source [ vrf vrfName ] { interfaceType interfaceSpecifier | ipAddress }
Syntax
no ip icmp update-source [ vrf vrfName ] [ interfaceType interfaceSpecifier
| ipAddress ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a unique source address or interface for any ICMP messages that the E
Description
Series router generates. The no version removes the unique source specification.
Options
Global Configuration
Mode
798
ip icmp update-source
vrfName Name of the VRF; string of 1–32 alphanumeric characters
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
ipAddress IP address of an E Series interface over which you want to send ICMP
messages