JunosE 11.2.x Command Reference Guide A to M
match tag
Syntax
Release Information
Description
Options
Mode
1282
match tag tagValue [ tagValue ]*
no match tag [ tagValue ]*
Command introduced before JunosE Release 7.1.0.
Matches the tag value of the destination routing protocol. The no version removes the
match clause from a route map unless you specify a value, in which case only that value
is removed from the match clause.
tagValue—Number in the range 0–4294967295
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.