Match Distance - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

match distance

Syntax
Release Information
Description
Options
Mode
1268
match distance distance [ distance ]*
no match distance [ distance ]
Command introduced before JunosE Release 7.1.0.
Matches any routes that have the specified administrative distance. The no version
removes the match clause from a route map unless you specify a value, in which case
only that value is removed from the match clause.
NOTE: Matching a distance is useful only when applied to a route being redistributed
out of a routing table. Distance is used to determine the relative preference between
routes to the same prefix in order to pick the best route to that prefix in the routing table.
Distance has no meaning in any other circumstance and any attempt to match distance
will fail.
distance—Administrative distance in the range 0–255
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.