Traffic Shaping Configuration Commands; Display Qos Gts Interface - 3Com S7906E Command Reference Manual

1
Traffic Shaping and Line Rate Configuration
Commands

Traffic Shaping Configuration Commands

display qos gts interface

Syntax
display qos gts interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display qos gts interface command to display traffic shaping configuration information.
If no port is specified, traffic shaping configuration information of all ports is displayed.
Examples
# Display traffic shaping configuration information of all ports.
<Sysname> display qos gts interface
Interface: GigabitEthernet2/0/1
Rule(s): If-match queue 2
CIR 640 (kbps), CBS 40960 (byte)
Table 1-1 Description on the fields of the display qos gts command
Field
Interface
Rule(s)
CIR
CBS
Port name identified by port type and port number
Match criteria.
"If-match queue 2" indicates that traffic shaping is performed for
traffic in queue 2.
Committed information rate (CIR) in kbps
Committed burst size (CBS) in bytes
1-1
Description