Bandwidth Downstream Priority-Queue - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the bandwidth downstream command to enable the downlink bandwidth allocation policy for the
ONU port.
Use the undo bandwidth downstream command to restore the default.
By default, the downlink bandwidth allocation policy is disabled.
Related commands: bandwidth downstream.
The downlink bandwidth limit configuration commands take effect only when the downlink bandwidth
allocation policy is enabled.
Examples
# Enable the downlink bandwidth allocation policy for ONU 2/0/1:1.
<Sysname> system-view
[Sysname] interface onu 2/0/1:1
[Sysname-Onu2/0/1:1] bandwidth downstream policy enable

bandwidth downstream priority-queue

Syntax
bandwidth downstream priority-queue priority high-priority-reserved value
undo bandwidth downstream priority-queue high-priority-reserved
View
OLT port view
Default Level
2: System level
Parameters
priority: Queue priority, in the range 0 to 7.
value: Buffer size reserved for packets of high-priority queues, in bytes. It is in the range 0 to 131070
and defaults to 0.
6-3