Traffic Behavior Configuration Commands - 3Com S7906E Command Reference Manual

traffic classifier
Syntax
traffic classifier classifier-name [ operator { and | or } ]
undo traffic classifier classifier-name
View
System view
Default Level
2: System Level
Parameters
and: Specifies the relationship among the rules in the class as logic AND. That is, a packet is matched
only when it matches all the rules defined for the class.
or: Specifies the relationship among the rules in the class as logic OR. That is, a packet is matched if it
matches a rule defined for the class.
classifier-name: Name of the class to be created.
Description
Use the traffic classifier command to create a class. This command also leads you to class view.
Use the undo traffic classifier command to remove a class.
By default, a packet is matched only when it matches all the rules configured for the class.
Examples
# Create a class named class 1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1]

Traffic Behavior Configuration Commands

accounting
Syntax
accounting
undo accounting
View
Traffic behavior view
Default Level
2: System Level
Parameters
None
2-5