Vpn-Target (Vpn Instance View) - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Examples
# Define a tunneling policy, specifying that only GRE tunnels can be used and the number of tunnels for
load balancing be 2.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1] tunnel select-seq gre load-balance-number 2

vpn-target (VPN instance view)

Syntax
vpn-target vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ]
undo vpn-target { all | { vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ] }
View
VPN instance view
Default Level
2: System level
Parameters
vpn-target&<1-8>: Adds the VPN target extended community attribute to the import or export VPN
target extended community list and specify the VPN target in the format nn:nn or IP-address:nn. &<1-8>
means that you can specify this argument for up to 8 times.
A VPN target attribute can be of 3 to 21 characters and in either of these two formats:
16-bit AS number:32-bit user-defined number. For example, 101:3.
32-bit IP address:16-bit user-defined number. For example, 192.168.122.15:1.
both: Specifies both the export routing information to the destination VPN extended community and the
import routing information from the destination VPN extended community. This is the default.
export-extcommunity: Specifies the export routing information to the destination VPN extended
community.
import-extcommunity: Specifies the import routing information from the destination VPN extended
community.
all: Specifies all export routing information to the destination VPN extended community and import
routing information from the destination VPN extended community.
Description
Use the vpn-target command to associate the current VPN instance with one or more VPN targets.
Use the undo vpn-target command to remove the association of the current VPN instance with VPN
targets.
VPN target has no default. You must configure it when creating a VPN instance.
Examples
# Associate the current VPN instance with VPN targets.
<Sysname> system-view
1-62

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents