3Com S7906E Command Reference Manual page 1698

remark service-vlan-id
Syntax
remark service-vlan-id vlan-id-value
undo remark service-vlan-id
View
Traffic behavior view
Default Level
2: System Level
Parameters
vlan-id-value: VLAN ID to be set for packets, in the range of 1 to 4094.
Description
Use the remark service-vlan-id command to configure the action of setting the service provider
network VLAN ID for a traffic behavior.
Use the undo remark service-vlan-id command to remove the action of setting the service provider
network VLAN ID.
Note that: If the remark service-vlan-id action will be applied to the inbound direction of a port or
port group on an EA LPU, the classification rule must be configured with the if-match
customer-vlan-id command, and the other actions except remark dot1p cannot be configured in
the traffic behavior.
If the remark service-vlan-id action will be applied to the outbound direction of a port or port group
on an SC LPU, any other actions except filer and remark dot1p cannot be configured in the traffic
behavior.
The remark service-vlan-id action cannot be applied to a VLAN or applied globally.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action of setting the service provider network VLAN ID to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark service-vlan-id 2
traffic behavior
Syntax
traffic behavior behavior-name
undo traffic behavior behavior-name
View
System view
2-16