Display Qos Policy - 3Com S7906E Command Reference Manual

In a QoS policy with multiple class-to-traffic-behavior associations, if the action of creating an outer
VLAN tag, the action of setting customer network VLAN ID, or the action of setting service provider
network VLAN ID is configured in a traffic behavior, we recommend you not to configure any other
action in this traffic behavior. Otherwise, the QoS policy may not function as expected after it is applied.
Examples
# Associate the behavior named test with the class named database in the policy user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier database behavior test

display qos policy

Syntax
display qos policy user-defined [ policy-name [ classifier classifier-name ] ]
View
Any view
Default Level
1: Monitor level
Parameters
policy-name: Policy name. If it is not provided, the configuration of all the user defined policies is
displayed.
classifier-name: Name of a class in the policy. If it is not provided, all the classes in the policy are
specified.
Description
Use the display qos policy command to display the configuration of a specified policy, including the
configuration of the classes and the associated traffic behaviors in the policy.
Examples
# Display the configuration of all the user specified policies.
<Sysname> display qos policy user-defined
User Defined QoS Policy Information:
Policy: test
Classifier: test
Behavior: test
Accounting Enable
2-18