Qos Configuration Commands In An Epon System; Qos Configuration Commands At The Olt Side; Bandwidth Downstream - 3Com S7906E Command Reference Manual

6

QoS Configuration Commands in an EPON System

QoS Configuration Commands at the OLT Side

bandwidth downstream

Syntax
bandwidth downstream { max-bandwidth value | max-burstsize value } *
undo bandwidth downstream { max-bandwidth | max-burstsize } *
View
ONU port view
Default Level
2: System level
Parameters
max-bandwidth value: Specifies the maximum bandwidth in kbps. The value argument ranges from 0
to 999994. The system default is 999994 kbps.
max-burstsize value: Specifies the maximum burst buffer size in bytes. The value argument ranges
from 0 to 8388480. The system default is 8388480 bytes.
Description
Use the bandwidth downstream command to configure the downlink bandwidth limit.
Use the undo bandwidth downstream command to restore the default.
Related commands: bandwidth downstream policy enable.
This command takes effect only when the downlink bandwidth allocation policy is enabled.
The configured downlink bandwidth limit takes effect only on known unicasts, but not on unknown
unicasts, multicasts, or broadcasts.
Examples
# Set the downstream bandwidth limit to 800000 kbps and maximum burst size to 8000000 bytes on
ONU 2/0/1:1.
<Sysname> system-view
[Sysname] interface onu 2/0/1:1
[Sysname-Onu2/0/1:1] bandwidth downstream max-bandwidth 800000 max-burstsize 8000000
6-1