Qos Wred Apply; Qos Wred Queue Table - 3Com S7906E Command Reference Manual

qos wred apply

Syntax
qos wred apply table-name
undo qos wred apply
View
Interface view, port group view
Default Level
2: System Level
Parameters
table-name: Name of a global WRED table.
Description
Use the qos wred apply command to apply a WRED table to the current port or port group.
Use the undo qos wred apply command to cancel the application.
By default, no WRED table is applied to any port or port group.
Related commands: display qos wred interface.
Examples
# Apply the WRED table queue-table1 to the GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos wred apply queue-table1

qos wred queue table

Syntax
qos wred queue table table-name
undo qos wred table table-name
View
System view
Default Level
2: System Level
Parameters
table table-name: Specifies a name for the table, a string of 1 to 32 characters..
Description
Use the qos wred queue table command to create a WRED table and enter WRED table view.
Use the undo qos wred table command to remove a WRED table.
4-3