3Com S7906E Command Reference Manual page 1734

undo qos cos-local-precedence-map
View
ONU port view
Default Level
2: System level
Parameters
cos0-map-local-prec: Local precedence to which CoS 0 is to be mapped, in the range of 0 to 3.
cos1-map-local-prec: Local precedence to which CoS 1 is to be mapped, in the range of 0 to 3.
cos2-map-local-prec: Local precedence to which CoS 2 is to be mapped, in the range of 0 to 3.
cos3-map-local-prec: Local precedence to which CoS 3 is to be mapped, in the range of 0 to 3.
cos4-map-local-prec: Local precedence to which CoS 4 is to be mapped, in the range of 0 to 3.
cos5-map-local-prec: Local precedence to which CoS 5 is to be mapped, in the range of 0 to 3.
cos6-map-local-prec: Local precedence to which CoS 6 is to be mapped, in the range of 0 to 3.
cos7-map-local-prec: Local precedence to which CoS 7 is to be mapped, in the range of 0 to 3.
Description
Use the qos cos-local-precedence-map command to configure the mappings between CoS
precedence values to local precedence values on an ONU port.
Use the undo qos cos-local-precedence-map command to restore the mappings between CoS
precedence values to local precedence values on an ONU port to defaults.
Table 6-3 shows the default CoS precedence values and the corresponding local precedence queues of
the packets on an ONU port.
This command takes effect on the downlink data stream only.
Table 6-3 Default mapping between CoS precedence and local precedence
0
1
2
3
4
5
6
CoS precedence Local precedence
0
0
1
1
2
2
3
6-6