3Com S7906E Command Reference Manual page 1697

Description
Use the remark ip-precedence command to configure the action of setting IP precedence for a traffic
behavior.
Use the undo remark ip-precedence command to remove the action of setting IP precedence.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set IP precedence to 6 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark ip-precedence 6
remark local-precedence
Syntax
remark local-precedence local-precedence
undo remark local-precedence
View
Traffic behavior view
Default Level
2: System Level
Parameters
local-precedence: Local precedence to be set for packets, in the range of 0 to 7.
Description
Use the remark local-precedence command to configure the action of setting local precedence for a
traffic behavior.
Use the undo remark local-precedence command to remove the action of remarking local
precedence.
Note that, when the remark dot1p command is used together with the remark local-precedence
command, the 802.1p precedence to be set for packets must be the same as the local precedence to be
set for packets. Otherwise, the corresponding policy cannot be applied successfully.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set local precedence to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark local-precedence 2
2-15