3Com S7906E Command Reference Manual page 1699

Default Level
2: System Level
Parameters
behavior-name: Name of the traffic behavior to be created.
Description
Use the traffic behavior command to create a traffic behavior. This command also leads you to traffic
behavior view.
Use the undo traffic classifier command to remove a traffic behavior.
Related commands: qos policy, qos apply policy, classifier behavior.
Examples
# Define a traffic behavior named behavior1.
<Sysname> system-view
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]
QoS Policy Configuration Commands
classifier behavior
Syntax
classifier classifier-name behavior behavior-name [ mode do1q-tag-manipulation ]
undo classifier classifier-name
View
Policy view
Default Level
2: System Level
Parameters
classifier-name: Name of an existing class.
behavior–name: Name of an existing traffic behavior.
mode dot1q-tag-manipulation: Specifies that the association relationship between the class and the
traffic behavior is used for the VLAN mapping function.
Description
Use the classifier behavior command to associate a traffic behavior with a class.
Use the undo classifier command to remove a class from a policy.
Note that each class can be associated with only one traffic behavior.
Related commands: qos policy.
2-17