Remark Dot1P - 3Com S7906E Command Reference Manual

Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action of setting the customer network VLAN ID to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark customer-vlan-id 2

remark dot1p

Syntax
remark dot1p 8021p
undo remark dot1p
View
Traffic behavior view
Default Level
2: System Level
Parameters
8021p: 802.1p precedence to be set for packets, in the range 0 to 7.
Description
Use the remark dot1p command to configure the action of setting 802.1p precedence for a traffic
behavior.
Use the undo remark dot1p command to remove the action of setting 802.1p precedence
Note that, when the remark dot1p command is used together with the remark local-precedence
command, the 802.1p precedence to be set for packets must be the same as the local precedence to be
set for packets. Otherwise, the corresponding policy cannot be applied successfully.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the action to set 802.1p precedence to 2 for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2
remark drop-precedence
Syntax
remark drop-precedence drop-precedence-value
undo remark drop-precedence
View
Traffic behavior view
2-12