Display Qos Vlan-Policy - 3Com S7906E Command Reference Manual

Direction: Inbound
Policy: abc_policy
Classifier: abc
Operator: AND
Rule(s) : If-match dscp cs1
Behavior: abc
Committed Access Rate:
CIR 640 (kbps), CBS 4000 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
Green : 0(Packets)
Table 2-7 Description on the fields of the display qos policy interface command
Field
Interface
Direction
Policy
Classifier
Operator
Rule(s)
Behavior

display qos vlan-policy

Syntax
display qos vlan-policy { name policy-name | vlan [ vlan-id ] } [ slot slot-id ]
View
Any view
Default Level
1: Monitor level
Parameters
name policy-name: Specifies to display the information about the VLAN policy with the specified name.
vlan vlan-id: Specifies to display the information about the VLAN policy applied to the specified VLAN.
slot-id: Specifies to display the information about the VLAN policies applied to VLANs on the board
seated in the specific slot. If the slot-id argument is not specified, this command displays the information
about the VLAN policies applied to the SRPU.
Port name, comprising of port type and port number
Direction of the port where the policy is applied
Name of the policy applied to the port
Name of the class in the policy and its configuration
Failed indicates that the policy is not successfully applied
Logical relationship among the classification rules in a class
Classification rules in the class
Name of the behavior in the policy and its configuration
2-21
Description