3Com S7906E Command Reference Manual page 1685

customer-vlan-id vlan-id-list
service-vlan-id vlan-id-list
Description
Use the if-match command to define a rule to match a specific type of packets.
Use the undo if-match command to remove a matching rule.
Suppose the logical relationship between classification rules is and. Note the following when using the
if-match command to define matching rules.
If multiple matching rules with the acl or acl ipv6 keyword specified are defined in a class, the
actual logical relationship between these rules is or when the policy is applied.
If multiple matching rules with the customer-vlan-id or service-vlan-id keyword specified are
defined in a class, the actual logical relationship between these rules is or when the policy is
applied.
Examples
# Define a rule for class1 to match the packets with their destination MAC addresses being
0050-ba27-bed3.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match destination-mac 0050-ba27-bed3
# Define a rule for class2 to match the packets with their source MAC addresses being
0050-ba27-bed2.
<Sysname> system-view
[Sysname] traffic classifier class2
[Sysname-classifier-class2] if-match source-mac 0050-ba27-bed2
Field
Specifies to match the packets of specified VLANs of user
networks. The vlan-id-list argument specifies a list of VLAN
IDs, in the form of vlan-id to vlan-id or multiple discontinuous
VLAN IDs (separated by space). You can specify up to eight
VLAN IDs for this argument at a time. VLAN ID is in the range
1 to 4094.
In a class configured with the operator and, the logical
relationship between the customer VLAN IDs specified for
the customer-vlan-id keyword is or.
Specifies to match the packets of specified VLANs of the
operator's network. The vlan-id-list argument is a list of VLAN
IDs, in the form of vlan-id to vlan-id or multiple discontinuous
VLAN IDs (separated by space). You can specify up to eight
VLAN IDs for this argument at a time. VLAN ID is in the range
1 to 4094.
In a class configured with the operator and, the logical
relationship between the service VLAN IDs specified for the
service-vlan-id keyword is or.
Description
2-3