3Com S7906E Command Reference Manual page 1704

Description
Use the display qos vlan-policy command to display the information about VLAN policies.
If the vlan-id argument is not specified, the information about all the VLAN policies will be displayed.
Examples
# Display the information about the VLAN policy named test.
<Sysname> display qos vlan-policy name test
Policy test
Vlan 300: inbound
Table 2-8 Description on the fields of the display qos vlan-policy command
Field
Policy
Vlan 300
inbound
# Display the information about the VLAN policy applied to VLAN 300.
<Sysname> display qos vlan-policy vlan 300
Vlan 300
Direction: Inbound
Policy: test
Classifier: test
Operator: AND
Rule(s) : If-match customer-vlan-id 3
Behavior: test
Accounting Enable:
0 (Packets)
Committed Access Rate:
CIR 6400 (kbps), CBS 4000 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
Green : 0(Packets)
Table 2-9 Description on the fields of the display qos vlan-policy command
Field
Vlan 300
Inbound
Classifier
Behavior
Name of the VLAN policy
ID of the VLAN where the VLAN policy is applied
VLAN policy is applied in the inbound direction of the VLAN.
ID of the VLAN where the VLAN policy is applied
VLAN policy is applied in the inbound direction of the VLAN.
Name of the class in the policy and its configuration
Name of the behavior in the policy and its configuration
2-22
Description
Description