3Com S7906E Command Reference Manual page 1693

Parameters
cpu: Redirects traffic to the CPU.
interface interface-type interface-number: Redirects traffic to an interface identified by its type and
number.
next-hop: Specifies the next hop to redirect the traffic to.
ipv4-add: IPv4 address of the next hop.
ipv6-add: IPv6 address of the next hop. The interface-type interface-number argument is a VLAN
interface number. If the IPv6 address is a link-local address, you must specify a VLAN interface for the
IPv6 address of the next hop; if the IPv6 address is not a link-local address, you need not specify a
VLAN interface for the IPv6 address of the next hop.
Description
Use the redirect command to configure traffic redirecting action for a traffic behavior.
Use the undo redirect command to remove the traffic redirecting action.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure the redirecting action to redirect traffic to GigabitEthernet2/0/1 port.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface GigabitEthernet 2/0/1
remark customer-vlan-id
Syntax
remark customer-vlan-id vlan-id-value
undo remark customer-vlan-id
View
Traffic behavior view
Default Level
2: System Level
Parameters
vlan-id-value: VLAN ID to be set for packets, in the range of 1 to 4094.
Description
Use the remark customer-vlan-id command to configure the action of setting the customer network
VLAN ID for a traffic behavior.
Use the undo remark customer-vlan-id command to remove the action of setting the customer
network VLAN ID.
Note that the action of setting the customer network VLAN ID cannot be applied to a VLAN or applied
globally.
2-11