Environmental Information - ABB IRB 7600 Product Manual

6 Decommissioning

6.2 Environmental information

6.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Material
Aluminium
Batteries, Lithium
Cast iron/nodular iron
Copper
Neodymium
Nickel
Oil, grease
Plastic/rubber
Steel
Continues on next page
410
Example application
Covers, synchronization brackets
Serial measurement board
Base, lower arm, upper arm
Cables, motors
Brakes, motors
Turning disc (foundry)
Gearboxes
Cables, connectors, drive belts, and so on.
Gears, screws, base frame, and so on.
© Copyright 2007 - 2023 ABB. All rights reserved.
Product manual - IRB 7600
3HAC022033-001 Revision: AH