Environmental Information - ABB IRB 1100 Product Manual

8 Decommissioning

8.2 Environmental information

8.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Material
Aluminium
Batteries, Lithium
Copper
Lead
Neodymium
Oil, grease
Plastic/rubber
Steel
Continues on next page
746
Example application
Base, base adapter, swing, swing support, lower arm,
lower arm support, swing, covers, motors, gearboxes,
SMB unit, etc
Serial measurement board
Cables, motors
Serial measurement board
Motors
Gearboxes, process hub, etc
Cables, SMB unit, gearboxes, timing belt, cooling
pads, connector kits, etc
Base, swing, lower arm, extender unit, wrist, motors,
gearboxes, SMB unit, etc
© Copyright 2019-2022 ABB. All rights reserved.
Product manual - IRB 1100
3HAC064992-001 Revision: L