ABB Robotics IRB 1100 Product Manual page 313

2
3
Removing the process hub
1
2
Product manual - IRB 1100
3HAC064992-001 Revision: C
Action
Jog the robot to the specified position:
• Axis 1: 0°
• Axis 2: 110° (IRB 1100-4/0.475) /95° (IRB
1100-4/0.58)
• Axis 3: -20° (IRB 1100-4/0.475)/ -6° (IRB
1100-4/0.58)
• Axis 4: 0°
• Axis 5: 0°
• Axis 6: No significance.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded
space.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the screws and carefully open the cover.
CAUTION
Be aware of the cabling that is attached to the
cover! The cover can not be removed completely
until the connectors are disconnected, as shown
in following steps.
© Copyright 20192020 ABB. All rights reserved.
5 Repair
5.6.1 Replacing the housing
Continued
Note
xx1800003289
Note
xx1800002944
Continues on next page
313