2
Product manual - IRB 1100
3HAC064992-001 Revision: C
Action
Valid for cabling with rear interface
Insert the cable package in the base and up
through the axis-1 gearbox, through the rear.
Tip
Wrap the connectors with the masking tape.
CAUTION
Make sure that no cables or hoses are twisted or
strained. Reroute if necessary.
© Copyright 20192020 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Note
xx1800003047
Cable protection tube orientation:
use the encircled notch on the
cable protection tube as a refer-
ence when inserting the cable
package, which should be at the
opposite direction to the locking
screw hole on the gearbox.
xx1800003048
Continues on next page
263
Need help?
Do you have a question about the IRB 1100 and is the answer not in the manual?