ABB Robotics IRB 1100 Product Manual page 330

5 Repair
5.6.1 Replacing the housing
Continued
3
4
5
Continues on next page
330
Action
Check the O-ring.
Replace if damaged.
Refit the labyrinth sealing ring lightly and evenly.
Note
Make sure the labyrinth sealing ring is well fitted
to the axis-3 gearbox without any deflection.
Apply a little Loctite 243 to the screws and secure
the labyrinth sealing ring with the screws.
© Copyright 20192020 ABB. All rights reserved.
Note
xx1900001424
xx1900001417
Screw: M3x4 (2 pcs)
Tightening torque: 0.8 Nm
xx1900001425
Product manual - IRB 1100
3HAC064992-001 Revision: C