Risk Of Tipping/Stability - ABB Robotics IRB 1100 Product Manual

3.2.3 Risk of tipping/stability

Risk of tipping
If the robot is not fastened to the foundation while moving the arm, the robot is not
stable in the whole working area. Moving the arm will displace the center of gravity,
which may cause the robot to tip over.
The shipping position is the most stable position.
Do not change the robot position before securing it to the foundation!
Shipping and transportation position
This figure shows the robot in its shipping position and transportation position.
IRB 1100-4/0.475
xx1900000106
Product manual - IRB 1100
3HAC064992-001 Revision: C
16.5°
© Copyright 20192020 ABB. All rights reserved.
3 Installation and commissioning
3.2.3 Risk of tipping/stability
41.4°
Continues on next page
51