Horizontal Areas/Volumes - Leica 3D Disto User Manual

3D Disto, Operation
6.6.1
Calculation during
measurements
step-by-step

Horizontal Areas/Volumes

1. Either select start point in sketch area or open Viewfinder if sketch is empty.
2. Target and measure a point with
sketch.
3. Press and measure next point with
4. Press to define line as part of the area. Proceed with measurement and line
selection. The polygon can be closed by pressing
grey colour.
5. Pop-up asks Measure Volume?Yes/No?
6. If Yes pop-up appears to choose between the different options to define the
height: Enter height for volume, measure height, Cancel.
7. Measure height:
Viewfinder opens, target and measure point on floor with
on ceiling. The height appears in the result window.

You can measure the points anywhere on the floor or ceiling area.
OR:
8. Enter height: Default for the entry is 0.000 m. Enter a desired value and press
OK or Cancel.
. Viewfinder is closed and point displayed in
.
. The area is highlighted in
98
followed by point