Horizontal Areas/Volumes - Leica 3D Disto User Manual

6.6.1
Calculation during
measurement
step-by-step
3D Disto
, Operation

Horizontal Areas/Volumes

1. Either select start point in sketch area or open Viewfinder if sketch is empty.
2. Target and measure a point with
in sketch.
3. Press and measure next point with
4. Press to define line as part of the area. Proceed with measurement and line
selection. The polygon can be closed by pressing
grey.
5. Pop-up appears to choose between the different options to define the height:
Enter height for volume, Measure height, Close List.
6. Measure height:
Viewfinder opens, target and measure point on floor with
point on ceiling. The height appears in the results window.
You can measure the points anywhere on the floor or ceiling area.
OR:
7. Enter height:
Default for the entry is 0.000 m. Enter a desired value and press OK or Cancel.
. Viewfinder is closed and point displayed
.
. The area is highlighted in
, followed by
99