Equivalent Horizontal Distance; Holdover - Leica 2700-B Instructions Manual

Rangemaster crf
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 35
EN
EQUIVALENT HORIZONTAL RANGE (
Shots at targets at a higher or lower elevation are
subject changed ballistic conditions. Therefore, they
require knowledge of the equivalent horizontal range,
which is relevant for hunting. Knowledge of the
important when using ballistic reticles, for example.
values are indicated by the additional display
Note:
Horizontal
measurements can also result in values
EHr
that differ from the „straight line" measured range, for
example if the temperature and/or the atmospheric
pressure vary from the normal values.
52
)

HOLDOVER (

EHr
Holdover is defined as the point that you aim at with
the weapon instead of the actual target point to
compensate for the variation caused by the trajectory
is
of the bullet (e.g. when using classic hunting reticles).
EHr
By displaying the holdover, the Leica Rangemaster can
EHr
.
provide valuable support in achieving the most accu-
rate shots possible when hunting. In addition to the
range, the calculation is based on the general condi-
tions discussed in the previous section and the ballistic
curve you have selected.
Note:
The holdover/elevation is always shown with reference
to the range to the target.
Example: If
30 cm higher on the object than without correction.
)
HOLd
30 is displayed, you would have to aim
300m

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents