Smart Horizontal Mode™
A wonderful application to measure the horizontal distance even with an obstruction in the
way.
*Along with the horizontal distance this application also records:
angle of the tilt
length of the tilt and
the vertical height from the device.
2 point indirect horizontal length measurement
This function helps you measure the length of an object indirectly just by focusing on 2
points.
*This application requires tripod.
** This application is applicable only to measure the horizontal length. To measure the vertical height
please use the Height Tracking function.
For measuring the distance from an object through Smart Horizontal
Mode™, press the Function key
On this screen, Smart Horizontal application
the middle right of the display.
Navigate to the icon using
application. Select the
Aim the laser at an angle of a certain tilt and record the measurement
by pressing
.
The device automatically calculates the horizontal distance from the
target.
Press the Function key
Move to the second page of the application screen using
On this screen, 2 point indirect length measurement application
icon
is located at the bottom centre of the display.
Navigate to the icon using
indirect measurement. Select the
To measure the horizontal length through this application, measure
points a. & b. from the same reference point.
How to measure a. & b.
Aim the laser at point a. and record that measurement by pressing
Next aim the laser at point b. as shown in the figure on the left and
record that measurement by pressing
The device automatically calculates the distance from a. to b.
The device also calculates the distance from the device to points a. &
b.
once.
keys to select for Smart Horizontal
=
icon using
key.
ocne.
keys to select the option for 2 point
icon using
again
icon is located at
keys.
=
key.