Honda Accord 2008 Manual page 732

07/11/02 09:19:59 61TA0000_110_0413
12. Turn the ignition switch to LOCK (0).
13. Replace the EVAP canister vent shut valve
(see page 11-431).
14. Turn the ignition switch to ON (II).
15. Reset the ECM/PCM with the HDS.
16. Do the ECM/PCM idle learn procedure (see page
11-343).
17. Do the EVAP FUNCTION TEST in the INSPECTION
MENU with the HDS.
Is the result OK ?
YES − Go to step 23.
NO − Check for poor connections or loose terminals
at the FTP sensor, the EVAP canister vent shut
valve, and the ECM/PCM, then go to step 1.
18. Reinstall the EVAP canister vent shut valve.
19. Turn the ignition switch to ON (II).
20. Reset the ECM/PCM with the HDS.
21. Do the ECM/PCM idle learn procedure (see page
11-343).
22. Do the EVAP FUNCTION TEST in the INSPECTION
MENU with the HDS.
Is the result OK ?
YES − Go to step 23.
−
NO Check for poor connections or loose terminals
at the FTP sensor, the EVAP canister vent shut
valve, and the ECM/PCM, then go to step 1.
23. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0457 indicated?
YES − Check for poor connections or loose
terminals at the FTP sensor, the EVAP canister vent
shut valve, and the ECM/PCM, then go to step 1.
−
NO Troubleshooting is complete. If any other
Temporary DTCs or DTCs are indicated, go to the
indicated DTC's troubleshooting.
11-413