Honda Accord 2008 Manual page 726

07/11/02 09:19:58 61TA0000_110_0407
16. Turn the ignition switch to LOCK (0).
17. Jump the SCS line with the HDS.
18. Disconnect ECM/PCM connector A (49P).
19. Connect FTP sensor 3P connector terminal No. 3 to
body ground with a jumper wire.
＊０３
20. Check for continuity between ECM/PCM connector
terminal A10 and body ground.
＊０４
Is there continuity?
YES
−
NO
PCM (A10) and the FTP sensor, then go to step 28.
FTP SENSOR 3P CONNECTOR
SG6 (BLK)
JUMPER WIRE
Wire side of female terminals
ECM/PCM CONNECTOR A (49P)
SG6 (BLK)
Terminal side of female terminals
− Go to step 34.
Repair open in the wire between the ECM/
21. Turn the ignition switch to LOCK (0).
22. Jump the SCS line with the HDS.
23. Disconnect ECM/PCM connector A (49P).
24. Connect FTP sensor 3P connector terminal No. 2 to
body ground with a jumper wire.
FTP SENSOR 3P CONNECTOR
FTP (LT GRN)
JUMPER WIRE
Wire side of female terminals
25. Check for continuity between ECM/PCM connector
terminal A27 and body ground.
ECM/PCM CONNECTOR A (49P)
Terminal side of female terminals
Is there continuity?
YES − Go to step 34.
−
NO Repair open in the wire between the ECM/
PCM (A27) and the FTP sensor, then go to step 28.
FTP (LT GRN)
(cont'd)
11-407
＊０５
＊０６