Shafts and Clutches
Countershaft Reverse Selector Hub, 3rd Gear, and 1st Gear Replacement
Special Tools Required
Driver 40 m m I.D. 07746-0030100
Removal
1. Remove the reverse selector hub (A) and the 4th
gear ( B ) w i t h a universal 2-jaw (or 3-jaw) puller (C).
Place a shaft protector (D) between the puller a n d
countershaft (E) to prevent damaging the
countershaft.
NOTE: Some of the reverse selector hubs are not
pressfitted, and can be removed without using a
puller.
2. Remove the needle bearing, snap ring, distance
collar, and 29 m m cotters f r o m the countershaft.
3. Remove the 1st gear (A) and 3rd gear ( B ) together
f r o m the countershaft (C) w i t h a puller (D). Place a
shaft protector (E) between the puller and
countershaft to prevent damaging the countershaft.
D
o
6
14-172